Photoion Gas Sensor PID Series

Detailed introduction:

PID photo ion gas sensor PID-AH (small range)

First, PID-AH gas sensor product introduction:
Photoelectric ion detectors (PHOTO IONIZATION DETECTORS) can measure VOC (volatile organic compounds) and some toxic gases in the (5ppb-50ppm) range. Many hazardous materials contain VOCs. Due to their high sensitivity to VOCs, PIDs are an indispensable tool for early warning of hazardous substances and leakage monitoring.

Second, the main characteristics of PID-AH gas sensor:
1, A series standard size, with a small spotlight source.
2. Measurement range: 50ppm
3, working environment, -40 to 40 degrees, relative humidity 0-95%
4, working voltage, 3-3.6V
5, power consumption, 110mW
6, overload: 50ppm (for isobutylene reference)
8, the response time is less than 3 seconds in the case of free diffusion
9, the service life is greater than 5 years
10, A series standard size pin
11, can replace the CITY products

PID photo ion gas sensor PID-A1 (large range)

First, PID-A1 gas sensor product introduction:
Photoelectric ion detectors (PHOTO IONIZATION DETECTORS) can measure VOC (volatile organic compounds) and some toxic gases in the (100ppb-6000ppm) range. Many hazardous materials contain VOC. Due to its high sensitivity to VOC, PID is an indispensable tool for early warning of hazardous substances and leakage monitoring.

Second, the main characteristics of the PID-A1 gas sensor:
1, A series standard size, with a small spotlight source.
2, measuring range: 300ppm
3, working environment, -40 to 55 degrees, relative humidity 0-95%
4, working voltage, 3-3.6V
5, power consumption, 110mW
6, overload: 6000ppm (for isobutylene reference)
8, the response time is less than 3 seconds in the case of free diffusion
9, the service life is greater than 5 years (excluding UV lamps and grid)
10, A series standard size pin