Insection Type Flow meter

 Insection Mangetic Flow Meter LDGC

 Technical Data

    Description      
  • SURE Insertion Magnetic Flowmeter is designed for measurement of the velocity of liquid. It can be installed in any pipeline of internal diameter from 200mm (8in) to 3000mm (120in),through  a small tapping. The complete lack of moving parts of this insertion flow sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out.

  • Reverse flow output are optional. A rapidly reversing magnetic field is produced in the lower housing. As the fluid moves through this field, a voltage generated that is measured and translated into a frequency signal proportional to flow rate.
    This square wave signal can be sent directly to a PLC, control or converted to 4 to 20mA.

Diameter

200-3000mm

Velocity

0.1~10m/s

Accuracy

0.1-0.5m

±2%

0.5-10m

±1.5%

0.1-10m

±2.5%

Liquid Conductivity

> 5μs/cm

Straight Pipe

5D for inlet; 3D for outlet

Liquid Temperature

-20…+150°C

Ambient

-20…+60°C

Pressure

1.6MPa

Protection

IP65(compact type ) ; IP68(remote type)

Signal Output

4-20mA/Pulse

Communication

RS485;Hart

Power Supply

220VDC;110-240Vac;Battery

  •  Model Selection

Model LDC Description
Diameter XXXX             DN6-DN2200
Structure S           Compact Type
L           Remote Type
Electrode Material M         SS316L
T         Titanium
D         Tantalum
H         Hastelloy Alloy C
P         Platiniridium
Signal Output 0       No Output
1       4-20mA/Pulse
Power Supply -0     110-240Vac
-1     24V DC(20-36V DC)
-2     Battery Power Supply
Communication 0   No Communication
1   Modbus RS485
2   HART
3   GPRS
4   Profibus DP
Connection S Simple Type
B Ball Valve Type
ไม่พบวีดีโอ
ไม่พบไฟล์
สินค้าใกล้เคียง